Mediator PCI MK-II for A4000T orig./A3000T Orig. + MMCD + Radeon 9200 + 256Mb
Busboard with five PCI slots for Amiga 4000T (original), Amiga 3000T (original), towerised A4000D with ZIII/ISA busboard or Amiga 1200/3000/4000 equipped with Micronik Zorro III busboard + Radeon 9200 gfx card with 256MB of memory, VGA and DVI output.
The special offer consists of Mediator PCI 3/4000T MK-II and the special 5V-only version of the Mobility Radeon 9200 gfx card with 256 MB of SGRAM memory, analogue VGA and the digital DVI output. You can freely decide how many of the Radeon SGRAM memory will be used by the P96 gfx system. The rest of this memory can be added to the Amiga Memory System as a Zorro III Fast RAM. In example you can assign 32MB for P96 and 224MB as a Zorro III Fast RAM, see the screenshot.
MKII version has a small update in the Core Logic firmware and is required if you use the
Radeon or Voodoo gfx card memory as a Amiga system memory when you do not have a phase5 processor
The Mediator is a PCI implementation for connecting PCI devices in Amiga computers, allowing expansion of Amiga with all kinds of industry standard hardware products like graphic, sound, network, USB, TV tuner, ISDN and MPEG-2 hardware decoder PCI cards.
Moreover, the Mediator PCI busboard is ready for SharkPPC PCI cards based on the latest PowerPC G3 and G4 processors.
The minimum hardware configuration is: Amiga 3000T (original) or Amiga 4000T (original) or Amiga 1200 equipped with Zorro III busboard or A4000 in E/BOX 4000 with Zorro III/ISA busboard.
The recommended configuration is: Amiga 3000T (original) or Amiga 4000T (original) with any 68060 (or PPC with 68060) turbo card with 128MB RAM, a SharkPPC G3/G4 card with 256MB SDRAM, a Voodoo3 graphic card.
The Mediator PCI 3/4000T features:
5 PCI slots (PCI 2.1 compatible)
For simultaneous use of up to five PCI cards fully assimilated in the Amiga environment.
PCI and Zorro III/II
Mediator PCI 3/4000T enables simultaneous operation of PCI cards in its slots and up to four Zorro III/II cards in the motherboard slots. One video slot is available.
33MHz PCI clock (66MHz with SharkPPC G3/G4)
With the PCI clock running at 33MHz, data transfers are executed with the bandwidth of up to 132MB/s and up to 264MB/s for 66MHz clocking.
32-bit PCI datapatch
Longword transfers are supported in all data transfer types: PCI to Amiga, Amiga to PCI and PCI to PCI.
4GB PCI memory space
Mediator PCI 3/4000T allows access to the entire 4GB of the PCI memory space. Access to the entire PCI memory space is executed through the 512MB window in the Zorro III space. With a hardware-supported paging mechanism, PCI memory access is executed without any slowdown compared to the linear memory access.
Busmastering/DMA in all PCI slots
Mediator PCI supports the busmastering mechanism in all its PCI slots. The PCI cards in the busmaster mode can offer extremely fast DMA access (up to 132MB/s) without any CPU load. Up to five PCI busmaster cards may be used simultaneously in Mediator.
SDRAM/SGRAM of PCI gfx card as a DMA buffer
Mediator PCI 3/4000T can use part of the graphic card memory for Amiga system needs. Thus, the entire system gains in effectiveness as graphic card's SDRAM/SGRAM memory modules are about 10x faster than FastRAM memory in Amiga turbo cards. With very short access time in SDRAM/SGRAM, several PCI busmaster cards may use this memory simultaneously. The PCI cards may then rush at the data transfer rate of up to 132MB/s without any CPU load whatsoever.
DMA to A3/4000 motherboard space
Mediator PCI 3/4000T includes a busmastering controller supporting transfers between PCI cards and the A3/4000 motherboard space.
Address and data parity control support
Address and data parity are supported in all Mediator slots. Parity support is necessary for using PCI cards like Sound Blaster Audigy, Sound Blaster Live! or ForteMedia FM801-based PCI cards.
Interrupt controller (4 lines to each PCI card)
The Mediator Interrupt Controller manages four independent PCI interrupt lines.
Compatible Processor Card Models:
Mediator PCI 3/4000T is compatible with all A3/4000 processor card models.
Mediator PCI 3/4000T, PCI cards in its slots, Zorro III and Zorro II cards in motherboard slots fit perfectly in original A3000 and A4000 Towers.
Installation is very easy, see Mediator PCI 3/4000T Quick Installation Guide.
The following PCI cards are currently supported in Mediator PCI 3/4000T:
* Graphic cards,
* Ethernet 10Mbps cards,
* Fast Ethernet 100Mbps cards,
* TV tuner cards,
* Sound cards,
* USB cards.
The following PCI card support is now being developed:
* I/O cards,
* MPEG-2 hardware decoders.
The complete list of the supported PCI card models: see the Mediator Driver Guide.
The Mediator PCI 3/4000T is available with a standard software pack: 2D and Warp3D Voodoo3 graphic drivers, Voodoo4 and Voodoo5 24-bit 2D graphic drivers, S3 ViRGE and S3 ViRGE DX 2D graphic drivers and Ethernet 10Mbps network drivers.
Mediator PCI 3/4000T can also be obtained with an extended software pack including the Mediator Multimedia CD.
Availability: 3 week